Specifications

SSR Command Line Interface Reference Manual 567
ppp set mlp-orderq-depth
ppp set mlp-orderq-depth
Purpose
Set the depth of the MLP packet order queue.
Format
ppp set mlp-orderq-depth ports <port list > qdepth <number-of-packets>
Mode
Configure
Description
The ppp set mlp-orderq-depth command allows you to set the depth of the queue used
by MLP to hold MLP packets for preserving the packet order.
Parameters
<port list> The MLP port(s) to which the queue depth applies.
<number-of-packets>
The depth of the queue, in packets, to hold MLP packets. The value can
be between 100 and 4000, inclusive. The default value is 1000.
Restrictions
Usage is restricted to MLP WAN ports only.
Example
To specify a queue depth of 2500 packets to hold packets for reordering on the MLP
bundles “mp.1”:
ssr(config)# ppp set mlp-orderq-depth ports mp.1 size 2500