Specifications

ppp set mlp-fragq-depth
566 SSR Command Line Interface Reference Manual
ppp set mlp-fragq-depth
Purpose
Set the depth of the MLP fragment queue.
Format
ppp set mlp-fragq-depth ports <port list > qdepth <number-of-packets>
Mode
Configure
Description
The ppp set mlp-fragq-depth command allows you to set the depth of the queue used by
MLP to hold packet fragments for reassembly.
Parameters
<port list> The MLP port(s) to which the queue depth applies.
<number-of-packets>
The depth of the queue, in packets, to hold unassembled packet
fragments. The value can be between 100 and 4000, inclusive. The default
value is 1000.
Restrictions
Usage is restricted to MLP WAN ports only.
Example
To specify a queue depth of 2500 packets to hold fragments for reassembly on the MLP
bundles “mp.1”::
ssr(config)# ppp set mlp-fragq-depth ports mp.1 size 2500