Specifications

ppp set mlp-frag-size
564 SSR Command Line Interface Reference Manual
ppp set mlp-frag-size
Purpose
Set the frame size under which no MLP fragmentation is needed.
Format
ppp set mlp-frag-size ports <port list > [size <number>]
Mode
Configure
Description
The ppp set mlp-frag-size command allows you to set the frame size under which no
fragmentation is needed for transmission on the MLP bundle. The default size is 1500
bytes. Any frames that are less than the value set by the ppp set mlp-frag-size command
are not fragmented. Any frames that are over the value are fragmented for transmission
on the MLP bundle.
Parameters
<port list> The MLP port(s) to which the frame size applies.
<number> The size of the frame, in bytes, that are fragmented by MLP. The value can
be between 64 and 1500, inclusive. The default value is 1500.
Restrictions
Usage is restricted to PPP WAN ports only.