Specifications

SSR Command Line Interface Reference Manual 563
ppp set mlp-encaps-format
ppp set mlp-encaps-format
Purpose
Set MLP encapsulation format.
Format
ppp set mlp-encaps-format ports <port list> [format short-format]
Mode
Configure
Description
The ppp set mlp-encaps-format command allows you to specify the encapsulation format
for MLP bundles. If this command is not configured, long format encapsulation is used for
MLP bundles.
Parameters
<port list>
The MLP port(s) to which you want to apply the encapsulation format
format short-format
Specifies the use of short format for MLP encapsulation.
Restrictions
Usage is restricted to PPP WAN ports only.
Example
To specify short format encapsulation for the MLP bundles “mp.1” and “mp.4-7”:
ssr(config)# ppp set mlp-encaps-format ports mp.1, mp.4-7 format short-
format