Specifications

ppp restart lcp-ncp
562 SSR Command Line Interface Reference Manual
ppp restart lcp-ncp
Purpose
Restart PPP LCP/NCP negotiation.
Format
ppp restart lcp-ncp ports <port list>
Mode
Enable
Description
The ppp restart lcp-ncp command allows you to reset and restart the LCP/NCP
negotiation process for PPP WAN ports.
Parameters
<port list> The ports for which you would like to re-establish LCP/NCP negotiation.
Restrictions
This command line is available only for PPP WAN ports.
Example
To restart LCP/NCP negotiation on serial ports 1 and 2 of slot 4:
ssr# ppp restart lcp-ncp ports se.4.1, se.4.2