Specifications

ManualsBrandsCabletron Systems ManualsComputer equipmentSmartSwitch 1800

551

552

553

554

555

556

557

558

559

560

SSR Command Line Interface Reference Manual 559

ppp define service

• The maximum allowable unacknowledged terminate requests before determining that

the peer is unable to respond.

• Activate or deactivate Random Early Discard (RED) for PPP ports.

• The maximum and minimum threshold values for RED high-, low-, and medium-

priority traffic.

In general, Cabletron recommends that the maximum threshold values be less than or

equal to the respective high-, low-, or medium-priority queue depth. The minimum

threshold values should be one-third of the respective maximum threshold.

• The number of seconds that will pass before a subsequent “resending” of the

configuration request will be transmitted.

• Activate and deactivate RMON for PPP WAN ports. Before you can view RMON

statistics such as Ethernet statistics and history for PPP WAN ports, RMON has to be

activated.

Parameters

The name you wish to assign to the newly created service profile.

bridging enable|disable

Specifying the enable keyword activates bridging for PPP WAN ports. Specifying the

disable keyword deactivates bridging for PPP WAN ports.

high-priority-queue-depth <number>

The number of items allowed in the PPP queue. You can specify a number between 1

and 65,535. Cabletron recommends a value within the 5 - 100 item range. The default

value is 20.

ip enable|disable

Specifying the enable keyword activates IP for PPP WAN ports. Specifying the

disable keyword deactivates IP for PPP WAN ports.

ipx enable|disable

Specifying the enable keyword activates IPX for PPP WAN ports. Specifying the

disable keyword deactivates IPX for PPP WAN ports.

lcp-echo on|off

Specifying the on keyword enables the sending of LCP Echo Request messages.

Specifying the off keyword disables the sending of LCP Echo Request messages. The

sending of LCP Echo Requests is enabled by default.

lcp-magic on|off

Specifying the on keyword enables the use of LCP magic numbers. Specifying the off

keyword disables the use of LCP magic numbers. The use of LCP magic numbers is

enabled by default.