Specifications

SSR Command Line Interface Reference Manual 539
port show bmon
Example
To display the state of ports with broadcast monitoring:
The above example shows three ports, with the port et.6.8 shut down for 39 seconds.
To display broadcast monitoring configuration values set for the ports:
In the above example, port et.1.1 has been configured with default values.
To display broadcast monitoring statistics for the ports:
In the above example, the current broadcast traffic on et.1.1 and et.7.8 is zero. The port
et.6.8 is currently shut down and it shows a burst of 10.032K packets per second at its shut
down. This port has been shut down twice because of excessive broadcast traffic.
ssr# port show bmon
Port: et.1.1 State: On
Port: et.6.8 State: ShutDn Expire: 39 (sec)
Port: et.7.8 State: On
ssr# port show bmon config
Port: et.1.1 Rate (Kpps): 10 Burst (sec): 1 Shutdown (sec):300
Port: et.6.8 Rate (Kpps): 10 Burst (sec): 5 Shutdown (sec):60
Port: et.7.8 Rate (Kpps): 2 Burst (sec): 2 Shutdown (sec):60
ssr# port show bmon stats
Port: et.1.1 Current Broadcast Rate (Kpps): 0.000
Port: et.6.8 Burst at port shutdown (Kpps): 10.032
ShutDn Count: 2
Port: et.7.8 Current Broadcast Rate (Kpps): 0.000