Specifications

port mirroring
532 SSR Command Line Interface Reference Manual
port mirroring
Purpose
Mirror traffic to a port for external analysis.
Format
port mirroring to <port> cpu-port-traffic | traffic-from [<port>|any]
traffic-to [<slot>|any]
Mode
Configure
Description
The port mirroring command mirrors the type of traffic you specify to a port. By attaching
a protocol analyzer to the port, you can observe and analyze the mirrored traffic.
Parameters
<port>
Specifies the port to which you want to send the mirrored traffic. Attach your protocol
analyzer to this port.
cpu-port-traffic
Mirrors traffic forwarded out by the Control Module. If you specify this option, you
cannot specify the traffic-from or traffic-to options.
traffic-from [<port>|any]
Mirrors all traffic coming from the specified port. If you specify this option, you must
also specify the traffic-to option.
traffic-to [<port>|any]
Mirrors traffic sent to the specified slot. The keyword any mirrors traffic sent to any of
the SSR slots that contain line cards. If you specify this option, you must also specify
the traffic-to option. To mirror traffic from the Control Module, use the cpu-port-
traffic option.