Specifications

SSR Command Line Interface Reference Manual 529
port disable
port disable
Purpose
Disable a port.
Format
port disable <port-list>
Mode
Configure
Description
The port disable command disables the specified ports. Disabled ports do not send or
receive any traffic. You might want to disable unused ports to prevent network users from
inadvertently or unscrupulously connecting to unoccupied but enabled ports on the SSR.
Parameters
port <port-list> Specifies the ports you are disabling.
Restrictions
None.
Examples
To disable port et.1.3 on the SSR:
To disable ports 1 through 5 on the Ethernet line card in slot 3 of the SSR chassis:
ssr(config)# port disable et.1.3
ssr(config)# port disable et.3.1-5