Specifications

524 SSR Command Line Interface Reference Manual
size <num>
The packet size. For Ethernet, specify a number from 0 – 1364.
wait <num>
The number of seconds the SSR will wait for a positive response from the host
before assuming that the host has not responded. The default is 1.
flood
Causes the SSR to send a new ping request as soon as a ping reply is received. If
you do not specify the flood option, the SSR waits to send a new request. The
amount of time the SSR waits is specified by the wait option.
dontroute
Restricts the ping to locally attached hosts.
Restrictions
If you enter this command from the User mode, the only parameter you can use is
<hostname-or-IPaddr>. To use any of the other parameters, you must be in Enable mode.