Specifications

SSR Command Line Interface Reference Manual 505
ospf monitor
0: DD: unknown LSA type 1: LS ACK: neighbor state low
0: LS ACK: bad ack 1140: LS ACK: duplicate ack
0: LS ACK: Unknown LSA type 0: LS REQ: neighbor state low
0: LS REQ: empty request 0: LS REQ: bad request
8: LS UPD: neighbor state low 0: LS UPD: newer self-gen LSA
0: LS UPD: LSA checksum bad 131: LS UPD: received less recent
LSA
0: LS UPD: unknown LSA type 2: Interface: Not configed for
OSPF
0: Interface: Invalid type 0: Interface: Mcast disabled.
0: Interface: Invalid state 0: Interface: Address not found
1: No vlinks and src is non local
ssr# ospf monitor next-hop-list
Next hops:
Address Type Refcount Interface
-------------------------------------------------------------
10.12.1.1 Neighbor 6 10.12.1.2 to-c4500
10.12.1.2 Direct 1 10.12.1.2 to-c4500
150.1.0.1 Direct 1 150.1.0.1 to-aval-eth5
172.23.1.5 Direct 3 172.23.1.5 to-SSR6
172.23.1.6 Neighbor 5 172.23.1.5 to-SSR6
172.23.1.21 Direct 3 172.23.1.21 to-SSR1
172.23.1.22 Neighbor 19 172.23.1.21 to-SSR1
172.23.1.25 Direct 3 172.23.1.25 lo
222.1.1.1 Direct 1 222.1.1.1 to-linux1
ssr# ospf monitor interfaces
>sent to 127.0.0.1
Source <<127.0.0.1 >>
Area: 0.0.0.0
IP Address Type State Cost Pri DR BDR
----------------------------------------------------------------------
172.23.1.5 Bcast BackupDR 2 2 172.23.1.6 172.23.1.5
10.12.1.2 Bcast BackupDR 1 2 10.12.1.1 10.12.1.2
172.23.1.21 Bcast BackupDR 1 2 172.23.1.22 172.23.1.21
done
ssr# ospf monitor neighbors
> sent to 127.0.0.1
Source <<127.0.0.1 >>