Specifications

ospf monitor
502 SSR Command Line Interface Reference Manual
provided, which describe the total number of routing neighbors and number of active
OSPF interfaces. Routing table statistics are summarized and reported as the number
of intra-area routes, inter-area routes, and AS external data base entries.
errors
Shows the various error conditions which can occur between OSPF routing neighbors
and the number of occurrences for each.
next-hop-list
Shows information about all valid next hops mostly derived from the SPF calculation.
interfaces
Shows information about all interfaces configured for OSPF. Information reported
includes the area, interface IP address, interface type, interface state, cost, priority, and
the IP address of the Designated Router and Backup Designated Router for the
network.
neighbors
Shows information about all OSPF routing neighbors. Information reported includes
the area, local interface address, router ID, neighbor IP address, state, and mode.
lsdb
Displays the link-state database (except for ASEs). This table describes the routers and
networks making up the AS. If the display-retransmit-list option is specified, the
retransmit list of neighbors held by this lsdb structure will also be printed.
display-retransmit-list – Displays the retransmit list from the link state database.
routes
Displays the OSPF routing table. This table reports the AS border routes, area border
routes, summary AS border routes, networks, summary networks and AS external
networks currently managed via OSPF.
type all
Shows all OSPF routes.
type asbrs-in-area
Shows routes to AS boundary routers in this area.
type area-border-routers
Shows routes to area border routers for this area.
type asbrs-other-areas
Shows summary routes to AS boundary routers in other areas.
type networks-in-area
Shows routes to networks in this area.
type networks-other-areas
Shows routes to networks in other areas.
type as-routes
Shows AS routes to non-OSPF networks.