Specifications

SSR Command Line Interface Reference Manual 491
Chapter 35
ospf Commands
The ospf commands let you display and set parameters for the Open Shortest Path First
(OSPF) routing protocol.
Command Summary
Table 25 lists the ospf commands. The sections following the table describe the command
syntax.
Table 25. ospf commands
ospf add interface <interfacename-or-IPaddr> [to-area <area-addr>|backbone]
[type broadcast|non-broadcast]
ospf add nbma-neighbor <hostname-or-IPaddr> to-interface <hostname-or-IPaddr>
[eligible]
ospf add stub-host [to-area <area-addr>|backbone] [cost <num>]
ospf add network | summary-range
ospf add virtual-link <number-or-string> [neighbor <IPaddr>]
[transit-area <area-num>]
ospf create area <area-num> [backbone]
ospf create-monitor destination <hostname-or-IPaddr>
ospf monitor <option-list>
ospf set area <area-num> [stub] [stub-cost <num>]
[authentication-method none|simple|md5]
ospf set ase-defaults [preference <num>] [cost <num>]
[type <num>] [inherit-metric]