Specifications

SSR Command Line Interface Reference Manual 489

ntp synchronize server

Purpose

Manually force the SSR to immediately synchronize with a NTP server.

Format

ntp synchronize server <host>

Mode

Enable

Description

The ntp synchronize server command forces the SSR to immediately synchronize its clock

with the NTP server. Unlike the Configuration mode ntp set server command, this Enable

mode command does not send periodic synchronization packets to the server. Instead,

each time this command is executed, the SSR synchronizes itself with the server. To have

the SSR synchronizes itself periodically, use the ntp set server command.

Parameters

<host> Specifies the hostname or the IP address of the NTP server.

Restrictions

None.

Examples

To synchronize the SSR against the NTP server 10.13.1.1:

ssr(config)# ntp synchronize server 10.13.1.1

%NTP-I-TIMESYNC, Time synchronized to Thu Jan 23 23:11:28 1999