Specifications

SSR Command Line Interface Reference Manual 481
Chapter 32
negate Command
The negate command negates a command in the scratchpad or the active configuration.
Format
negate <cmd-number> [scratchpad|active-config]
Mode
Configure
Description
The negate command allows you to negate one or more commands by specifying the
command number of the commands you want to negate. The command number for each
command can be found using the Configure mode show command. You can negate
commands from the active running system or non-committed commands from the
scratchpad. By default, if you do not specify active-config or scratchpad, the command to
negate is assumed to be in the active-config.
Parameters
<cmd-number> The number of the command(s) you want to negate. Use the show
command to display the command numbers.
active-config Negate the specified command from the active running system.
scratchpad Negate the specified non-committed command from the scratchpad.