Specifications

nat show
478 SSR Command Line Interface Reference Manual
Restrictions
None.
Examples
To display active NAT translations:
If there are many active NAT translations, you can filter the display by specifying local-
filter-in, global-filter-in, or type parameters for the nat show translations command.
To display NAT timeouts:
ssr# nat show translations all
Proto Local/Inside Global/Outside IP Type No. of flows
----- --------------------- --------------------- --------------- ------------
TCP 15.15.15.15:1896 100.1.1.1:1026 Dyn. ovr. 2
TCP 15.15.15.15:1897 100.1.1.1:1028 Dyn. ovr. (ftp) 0
TCP 15.15.15.15:1894 100.1.1.1:1024 Dyn. ovr. 2
TCP 15.15.15.15:1895 100.1.1.1:1025 Dyn. ovr. 2
TCP 15.15.15.15:1892 100.1.1.1:1027 Dyn. ovr. (ftp) 0
IP 10.10.10.10:* 200.1.1.1:* Dynamic 20
IP 4.4.4.4:* 202.1.1.1:* Static 789
ssr# nat show timeouts
All values in minutes
Flow timeout FTP Sess. timeout Dynamic Sess. timeout
------------ ----------------- ---------------------
2 30 1440