Specifications

SSR Command Line Interface Reference Manual 469
nat flush-dynamic-binding
nat flush-dynamic-binding
Purpose
Deletes dynamic NAT bindings.
Format
nat flush-dynamic-binding all| pool-specified [local-acl-pool <local-acl>] [global-pool
<ip-addr/ip-addr-range/ ip-addr-list>]
Mode
Enable
Description
The nat flush-dynamic-binding command deletes dynamic address bindings. You can
delete the dynamic address bindings for specific address pools or delete all dynamic
bindings.
Parameters
all
Deletes all NAT dynamic bindings.
local-acl-pool <local-acl>
The ACL that corresponds to the local IP address pool.
global-pool <ip-addr/ip-addr-range
The global address pool, defined in one of the following ways:
Asingle IP address in the form a.b.c.d
An IP address range in the form 10.10.1.1-10.10.1.50
IP address and mask in the form 1.2.0.0/255.255.0.0 or 1.2.3.0/16