Specifications

load-balance create group-name
434 SSR Command Line Interface Reference Manual
Note: You cannot specify port number 20, as it is the FTP data port. If you create a
group on the FTP control port for FTP, an implicit group will be created on
port number 20.
protocol tcp|udp
The protocol used by this group of load balancing servers.
persistence-level tcp|ssl
The level of persistence to use for the bindings, either tcp (TCP) or ssl (secure socket
layer). tcp is the default if the persistence-level parameter is not specified.
Restrictions
None.
Examples
To configure the server group ‘service2’:
ssr(config)# load-balance create group-name service2 virtual-ip
10.10.100.100 virtual-port 80 protocol tcp