Specifications

SSR Command Line Interface Reference Manual 431

load-balance allow access-to-servers

Purpose

Allows specified hosts to access the load balancing servers without address translation.

Format

load-balance allow access-to-servers client-ip <ipaddr/range> group-name <group name>

Mode

Configure

Description

Load balancing causes both source and destination addresses to be translated on the SSR.

It may be undesirable in some cases for a source address to be translated; for example,

when data is to be updated on each individual server. The load-balance allow access-to-

servers command lets you specify the hosts which are allowed to access a group of load

balancing servers without address translation.

Note that a host that is allowed to access a group of load balancing servers without

address translation cannot use the virtual IP address and port to access servers in the

group.

Parameters

The IP address of the host that is to be granted direct access, in the form a.b.c.d or

a range of IP addresses in the form 10.10.1.1-10.10.1.3.

The name of the group of load balancing servers.

Restrictions

None.