Specifications

SSR Command Line Interface Reference Manual 417

lfap set server-retry-interval

Purpose

Sets the interval (in seconds) between the LFAP client’s attempts to restore contact with a

lost FAS.

Format

lfap set server-retry-interval <number>

Mode

Configure

Description

The lfap set server-retry-interval command allows you to customize the amount of time

(in seconds) the LFAP client should wait before attempting to restore contact with a lost

FAS. After the LFAP client has attempted to contact each server, it will then wait the

specified number of seconds before attempting to resume contact.

Parameters

<number> The number of seconds (from 1 to 2,000, inclusive) the LFAP client will wait

before attempting to re-establish contact with a lost FAS. The default value

is 60 seconds.

Restrictions

None

Example

To set the number of seconds between attempts to resume contact with a lost FAS to 45:

ssr(config)# lfap set server-retry-interval 45