Specifications

lfap set lost-contact-interval
412 SSR Command Line Interface Reference Manual
lfap set lost-contact-interval
Purpose
Defines the period of time (in seconds) before the LFAP client realizes it has lost contact
with a FAS.
Format
lfap set lost-contact-interval <number>
Mode
Configure
Description
The lfap set lost-contact-interval command allows you to define the amount of time (in
seconds) the LFAP client will wait before realizing it has lost contact with a FAS and
declare the connection lost.
Parameter
<number> The number of seconds (from 10 to 2,000, inclusive) the LFAP client waits
before realizing that it has lost contact with a FAS. The default value is 60.
Restrictions
None
Example
To set the amount of time the LFAP client waits before realizing that it has lost contact
with a FAS to 30 seconds:
ssr(config)# lfap set lost-contact-interval 30