Specifications

lfap set batch-interval
410 SSR Command Line Interface Reference Manual
lfap set batch-interval
Purpose
Defines the number of seconds between subsequent transmissions of flow creation and
deletion information to a FAS.
Format
lfap set batch-interval<number>
Mode
Configure
Description
The lfap set batch-interval command defines the number of seconds between flow
creation and deletion transmissions to a FAS.
Parameter
<number> The number of seconds (from 1 to 2,000, inclusive) between transmission of
flow creation and deletion information (the interval). The default value is 1.
Restrictions
None
Example
To set the interval between flow creation and deletion transmissions to 5 seconds:
ssr(config)# lfap set batch-interval 5