Specifications

l2-tables show all-flows
398 SSR Command Line Interface Reference Manual
l2-tables show all-flows
Purpose
Show all L2 flows (for ports in flow-bridging mode).
Format
l2-tables show all-flows [vlan <VLAN-num> [source-mac <MACaddr>]] [undecoded]
Mode
User or Enable
Description
The l2-tables show all-flows command shows all the L2 flows learned by the SSR. The
SSR learns flows on ports that are operating in flow-bridging mode.
Parameters
vlan <VLAN-num>
The VLAN number associated with the flows. The VLAN number can be from 1 –
4095.
source-mac <MACaddr>
The source MAC address of the flows. Specify the MAC address in either of the
following formats:
xx:xx:xx:xx:xx:xx
xxxxxx:xxxxxx
undecoded
Prevents the SSR from displaying the vendor names with the MAC addresses.
Instead, the OUI of each MAC address is displayed “as is,” in hexadecimal format. If
you do not use this option, the SSR decodes the OUI and displays the vendor name.
Restrictions
None.