Specifications

ip-redundancy trace
376 SSR Command Line Interface Reference Manual
ip-redundancy trace
Purpose
Traces VRRP events.
Format
ip-redundancy trace vrrp events|state-transitions|packet-errors
ip-redundancy trace vrrp all enabled|disabled
Mode
Configure
Description
The ip-redundancy trace vrrp command displays messages when certain VRRP events
take place on the SSR. Use this command to display messages when a virtual router
changes from one state to another (i.e., from Backup to Master), a VRRP packet error is
detected, or when any VRRP event occurs.
Parameters
events Displays a message when VRRP receives any type of event. This
option is disabled by default.
state-transitions Displays a message when a VRRP router changes from one state to
another. This option is enabled by default.
packet-errors Displays a message when a VRRP packet error is detected. This
option is enabled by default.
all enabled|disabled Enables or disables all VRRP tracing.
Restrictions
None.