Specifications

ip-redundancy show
372 SSR Command Line Interface Reference Manual
ip-redundancy show
Purpose
Shows information about virtual routers.
Format
ip-redundancy show vrrp interface <interface> [id <vrid>] [verbose]
Mode
Enable
Description
The ip-redundancy show vrrp command displays configuration information about
virtual routers on an interface. You can display information for one virtual router or for all
the virtual routers on an interface. If you specify the verbose option, additional statistics
are shown, including the number of times a Backup router became the Master, the number
of VRRP advertisements received, and counts of VRRP packets that contain errors. These
statistics are gathered from the time you start the virtual router, or from the time you last
ran the ip-redundancy clear vrrp-stats command.
Parameters
<interface> Is the name of the interface where the virtual router resides. If
you do not specify the <vrid> parameter, information about all
virtual routers on the interface is displayed.
<vrid> Is the identifier of a virtual router. Specify a number between 1-
255.
verbose Causes VRRP statistics to be displayed for each virtual router
Restrictions
None.