Specifications

ip-redundancy set
370 SSR Command Line Interface Reference Manual
ip-redundancy set
Purpose
Sets parameters for a virtual router.
Format
ip-redundancy set vrrp <vrid> interface <interface> priority <number>|
adv-interval <number>|preempt-mode enabled|disabled|auth-type none|
text auth-key <key>
Mode
Configure
Description
The ip-redundancy set command lets you specify parameters for a virtual router,
including backup priority, advertisement interval, whether the router can preempt a
Master router that has a lower priority, and the type of authentication used.
Parameters
<vrid> Is the identifier of a virtual router. Specify a number between 1-
255.
<interface> Is the name of the interface where the virtual router resides.
priority <number> Specifies the backup priority to be used by this virtual router.
This number must be between 1-254. The default is 100. The
priority number applies only if the virtual router is not the IP
address owner. The priority of the IP address owner is always 255
and cannot be changed.
adv-interval <number> Is the interval between VRRP advertisements in seconds. The
default is 1 second.
preempt-mode Specifies whether the router can preempt a Master router that has
a lower priority. Use one of the following keywords: