Specifications

SSR Command Line Interface Reference Manual 359
ip-router show rib
ip-router show rib
Purpose
Display routing information base.
Format
ip-router show rib [detail]
Mode
Enable
Description
The ip-router show rib command shows the route-manager's routing information base
(RIB). For any given network, the routing daemon could have multiple routes. The active
route to any network is shown with a plus (+) sign next to it. The last active route is shown
with a minus (-) next to it. If a route has been the last active route and is also the current
active route, then it is shown with a asterisk (*) sign next to it. The legend is as follows:
• “+” Active Route
•“-”Last Active
• “*” Both
If the detail option is used, then additional information is displayed about these routes.
The announcements bits for the active route are shown which shows the protocol into
which this route is advertised.
Parameters
detail Allows you to view additional information about the routes in the RIB.
Restrictions
None.