Specifications

SSR Command Line Interface Reference Manual 357
ip-router policy redistribute
refines
This option specifies that the mask of the routes to be redistributed must be more
specific (i.e. longer) than the supplied mask. This is used to match subnets.
between <low-high>
Specifies that the mask of the destination must be as or more specific (i.e., as long as
longer) than the lower limit (the first number parameter) and no more specific (i.e. as
long as or shorter) than the upper limit (the second parameter).
restrict
Specifies that routes matching the filter are not to be redistributed.
metric
Indicates the metric to be associated with the redistributed routes.
tag
Tag to be associated with the exported OSPF routes.
ase-type
Routes exported from the GateD routing table into OSPF default to becoming type 1
ASEs. This default may be explicitly overridden here. Thus, this option should be
used to specify if the routes are to be exported as OSPF Type 1 or Type 2 ASE routes.
Note: Each protocol (RIP, OSPF, and BGP) has a configurable parameter that specifies
the default-metric associated with routes exported to that protocol. If a metric is
not explicitly specified with the redistribute command, then it is inherited from
the default-metric associated with the protocol to which the routes are being
exported.
Restrictions
None.