Specifications

SSR Command Line Interface Reference Manual 333

ip-router policy create bgp-export-destination

Purpose

Create an export destination for BGP routes.

Format

ip-router policy create bgp-export-destination

<number-or-string> <option-list>

Mode

Configure

Parameters

<number-or-string>

Creates a BGP export destination and associates an identifier (tag) with it.

<option-list>

Specifies the BGP export destination options you are setting. Specify the following:

autonomous-system <num>

Specifies the autonomous system of the peer-group to which we would be

exporting. Specify a number from 1 – 65535.

optional-attribute-list <num-or-string>

Specifies the identifier of the optional-attribute-list which contains the optional

attributes which are to be sent along with these exported routes. This option may

be used to send the BGP community attribute. Any communities specified in the

optional-attributes-list are sent in addition to any received with the route or those

specified with the 'set peer-group' or 'set peer-host' commands.

metric <num>

Specifies the metric to be associated with the BGP exported routes.

restrict

Restricts the export of BGP routes to the specified destination.

sequence-number <num>

Specifies the relative position of this export-destination in a list of bgp export-

destinations.