Specifications

About this Manual
32 SSR Command Line Interface Reference Manual
CLI Parameter Types
The following table describes all the parameter types you can use with the CLI.
How to use CLI (Command Line
Interface) commands to configure
and manage the SSR
SmartSwitch Router User Reference Manual
SYSLOG messages and SNMP traps SmartSwitch Router Error Reference Manual
For Information About... See the...
Data Type Descripton Example
conditional A numerical conditional
expression. Special symbols are
used to describe a numerical
condition: > (greater than), < (less
than) and != (not equal to).
<1024 or >2048 or !=4096
hexadecimal A hexadecimal number a7 or 0xa7
hostname Hostname of an IP host gauguin or john-pc
hostname/IP Hostname or IP address of a host nagasaki or 10.43.1.4
keyword A keyword described in the list of
acceptable keywords in the online
help
on or off
interface name
or IP address
Name of an interface or its IP
address
int1 or 10.1.4.33
interface name
list
A list of one or more interface
names delimited by commas
int1 or int1,int2,int3
IP address An IP address of the form x.x.x.x.
Some commands may explicitly
require a unicast or multicast
address.
10.1.2.3
IP address/mask A pair of IP address and mask
values. Depending on the
command, the mask may be a
network mask or filtering mask.
The mask can be described using
the traditional IP address syntax
(255.0.0.0) or a CIDR syntax (/8).
10.1.4.0/255.255.255.0 or
10.1.4.0/24
IP address list A list of IP addresses separated by
spaces but enclosed in quotes.
“10.1.4.4 10.1.5.5 10.1.6.6”