Specifications

SSR Command Line Interface Reference Manual 303

ip-policy show

Purpose

Displays information about active IP policies.

Format

ip-policy show [all] [policy-name <name>|all] [interface <name>|all]

Mode

Enable

Description

The ip-policy show command displays information about active IP policies, including

profile definitions, policy configuration settings, and next-hop gateways. The command

also displays statistics about packets that have matched an IP policy statement as well as

the number of packets that have been forwarded to each next-hop gateway.

Parameters

policy-name <name>|all

Is the name of an IP policy. Use the all keyword to display all active policies.

Note:

The ip-policy show all command works identically to the ip-policy show

policy-name all command

interface <name>|all

Displays information about IP policies that have been applied to a specified interface.

If you use the all keyword, the command displays information about IP policies that

have been applied to all interfaces (that is, by using the ip-policy apply interface all

command).

Restrictions

None.