Specifications

ip-policy apply
292 SSR Command Line Interface Reference Manual
ip-policy apply
Purpose
Applies an IP policy to an interface.
Format
ip-policy <name> apply local|interface <InterfaceName>|all
Mode
Configure
Description
Once you have defined an IP policy, you use the ip-policy apply command to apply the IP
policy to an interface. Once the IP policy is applied to the interface, packets start being
forwarded using the policy.
Parameters
<name> Is the name of a previously defined IP policy.
<InterfaceName> Is the name of the inbound interface to which you are applying the IP
policy.
local Causes packets generated by the SSR to be forwarded according to the
IP policy.
all Causes the IP policy to be applied to all IP interfaces.
Restrictions
IP policies can be applied to IP interfaces only.