Specifications

SSR Command Line Interface Reference Manual 291
Chapter 21
ip-policy Commands
The ip-policy commands let you set up policies that cause the SSR to forward packets to a
specified IP address based on information in a packet’s L3/L4 IP header fields.
Command Summary
Table 15 lists the ip-policy commands. The sections following the table describe the
command syntax.
Table 15. ip-policy commands
ip-policy <name> apply local|interface <name>|all
ip-policy clear all|policy-name <name>|all
ip-policy <name> deny acl <aclname>|everything-else [sequence <num>]
ip-policy <name> permit acl <aclname>|everything-else [sequence <num>]
next-hop-list <ip-addr-list> action policy-first|policy-last|policy-only
ip-policy <name> set [pinger on] [load-policy first-available|round-robin|
ip-hash sip|dip|both]
ip-policy show [all] [policy-name <name>|all] [interface <name>|all]