Specifications

ip show routes
290 SSR Command Line Interface Reference Manual
Example
The following example displays the contents of the routing table. It shows that some of the
route entries are for locally connected interfaces (“directly connected”), while some of the
other routes are learned from RIP.
ssr# ip show routes
Destination Gateway Owner Netif
----------- ------- ----- -----
10.1.0.0/16 50.1.1.2 RIP to-linux2
10.2.0.0/16 50.1.1.2 RIP to-linux2
10.3.0.0/16 50.1.1.2 RIP to-linux2
10.4.0.0/16 50.1.1.2 RIP to-linux2
14.3.2.1 61.1.4.32 Static int61
21.0.0.0/8 50.1.1.2 RIP to-linux2
30.1.0.0/16 directly connected - to-goya
50.1.0.0/16 directly connected - to-linux2
61.1.0.0/16 directly connected - int61
62.1.0.0/16 50.1.1.2 RIP to-linux2
68.1.0.0/16 directly connected - int68
69.1.0.0/16 50.1.1.2 RIP to-linux2
127.0.0.0/8 127.0.0.1 Static lo
127.0.0.1 127.0.0.1 - lo
210.11.99.0/24 directly connected - int41