Specifications

ip show interfaces
288 SSR Command Line Interface Reference Manual
ip show interfaces
Purpose
Display the configuration of IP interfaces.
Format
ip show interfaces [<interface-name>]
Mode
Enable
Description
The ip show interfaces command displays the configuration of an IP interface. If you
issue the command without specifying an interface name then the configuration of all IP
interfaces is displayed. This command displays the same information as the interface
show ip command.
Parameters
<interface-name> Name of the IP interface; for example, ssr4. If you do not specify an
interface name, the SSR displays all the IP interfaces.
Restrictions
If you specify an interface name, the name must belong to an existing IP interface.
Example
To display the configuration of the IP interface “int1”:
ssr# ip show interfaces int1
int1: flags=9862<BROADCAST, NOTRAILERS, RUNNING, SIMPLEX, LINK0, MULTICAST>
VLAN: IP2
Ports:
inet 10.1.12.1/24 broadcast 10.1.12.255