Specifications

ip show helper-address
286 SSR Command Line Interface Reference Manual
ip show helper-address
Purpose
Display the configuration of IP helper addresses.
Format
ip show helper-address [<interface-name>]
Mode
Enable
Description
The ip show helper-address command displays the configuration of IP helper addresses
configured on the system. One can specify the optional parameter, interface-name, to show
only the IP helper addresses configured for that interface. If the command is executed
without specifying an interface name then the IP helper address configuration of all
interfaces are shown.
Parameters
<interface-name> Name of the IP interface to display any configured IP helper addresses.
Restrictions
If you specify an interface name, the name must belong to an existing IP interface.