Specifications

ip set data-receive-size | control-receive-size
280 SSR Command Line Interface Reference Manual
ip set data-receive-size | control-receive-size
Purpose
Sets the size of the stack data and control receive queues.
Format
ip set data-receive-size|control-receive-size <num>
Mode
Configure
Description
The ip set data-receive-size|control-receive-size command allows you to tune the size of
the data and control pipes that reside between the IP stack and internal drivers on the
Control Module.
Parameters
data-receive-size <num>
Sets the size of the stack data receive queue. Specify a value from 256-1024 bytes. The
default is 512 bytes.
control-receive-size <num>
Sets the size of the stack control receive queue. Specify a value from 256-1024 bytes.
The default is 512 bytes.
Restrictions
None.