Specifications

SSR Command Line Interface Reference Manual 265
Chapter 20
ip Commands
The ip commands let you display route table entries and various IP related tables.
Command Summary
Table 14 lists the ip commands. The sections following the table describe the command
syntax.
Table 14. ip commands
ip add route <ipAddr-mask>|default gateway <hostname-or-IPaddr> [host]
[interface <hostname-or-IPaddr>] [preference <num>] [retain] [reject] [no-install]
[blackhole] [gate-list <gateway list>]
ip disable deny-attack|dns-lookup|fast-icmp|forwarding|
[icmp-redirect interface <name>|all]|[proxy-arp interface <name>|all]|
source-routing
ip dos disable port-attack-protection|directed-broadcast-protection
ip enable directed-broadcast
ip helper-address interface <interface-name> <helper-address> |all-interfaces [<udp-
port#>]
ip l3-hash channel <num>|all variant <num>
ip set data-receive-size|control-receive-size <num>
ip set port <port-list> forwarding-mode destination-based
ip show connections [no-lookup]