Specifications

interface show ipx
262 SSR Command Line Interface Reference Manual
interface show ipx
Purpose
Display configuration of an IPX interface.
Format
interface show ipx <InterfaceName> | all
Mode
Enable
Description
The interface show ipx command displays configuration information for an IPX interface.
Note:
You can display exactly the same information from within the ip facility using the
ipx show interfaces command.
Parameters
<InterfaceName> | all
Name of the IPX interface; for example, int9. Specify all to show configuration
information about all the IPX interfaces on the SSR.
Restrictions
None.
Examples
To display configuration information for the IPX interface called “int8”:
ssr# interface show ipx int8