Specifications

interface show ip
260 SSR Command Line Interface Reference Manual
interface show ip
Purpose
Display configuration of an IP interface.
Format
interface show ip <InterfaceName> | all
Mode
Enable
Description
The interface show ip command displays configuration information for an IP interface.
Note:
You can display exactly the same information from within the ip facility using the
ip show interfaces command.
Parameters
<InterfaceName> | all
Name of the IP interface; for example, int4. Specify all to show configuration
information about all the IP interfaces on the SSR.
Restrictions
None.
Examples
To display configuration information for the IP interface called “int7”:
ssr# interface show ip int7