Specifications

igmp set interface
238 SSR Command Line Interface Reference Manual
igmp set interface
Purpose
Configures IGMP parameters.
Format
igmp set interface <name/ipAddr>
[allowed-groups <group-list>|not-allowed-groups <group-list>] [use-all-ports]
Mode
Configure
Description
Sets IGMP parameters on a per-interface basis to control group restrictions and
optimization.
Parameters
allowed-groups <group-list>
Restricts the groups to only those specified.
not-allowed-groups <group-list>
Allows any groups besides those specified.
Note:
Specify only one of the above options, as they are mutually exclusive.
use-all-ports
Disables per-port IGMP control. By default, per-port IGMP control is enabled.
Note:
If the traffic is being supplied by a dvmrp tunnel, which uses CPU-based
switching, then for efficiency reasons, port based optimization is not used by this
traffic.
Restrictions
None.