Specifications

SSR Command Line Interface Reference Manual 235
Chapter 18
igmp Commands
The igmp commands let you display and set IGMP parameters.
Command Summary
Table 12 lists the igmp commands. The sections following the table describe the command
syntax.
Table 12. igmp commands
igmp enable interface <name/ipAddr>
igmp enable vlan <vlan-name>
igmp set interface <name/ipAddr> [allowed-groups <group-list>|not-allowed-groups
<group-list>] [use-all-ports]
igmp set queryinterval <num>
igmp set responsetime <num>
igmp set vlan <vlan-name> [host-timeout <num>] [querier-timeout <num>] [router-
timeout <num> leave-timeout <num> ]
igmp show interfaces [group <ipAddr>|interface <name/ipAddr>]
igmp show memberships [group <ipAddr>|port <num>]
igmp show timers
igmp show vlans
igmp start-snooping