Specifications
frame-relay define service
222 SSR Command Line Interface Reference Manual
• The maximum and minimum threshold values for RED high-, low-, and medium-
priority traffic.
In general, Cabletron recommends that the maximum threshold values be less than or
equal to the respective high-, low-, or medium-priority queue depth. The minimum
threshold values should be one-third of the respective maximum threshold.
• Activation and deactivation of RMON for frame relay VCs. Note that before you can
view RMON statistics such as Ethernet statistics and history for frame relay ports,
RMON has to be activated.
Parameters
<service name>
The name you wish to assign to the newly created service profile.
Bc <number>
The number of bits per second contained in a committed burst for a frame relay
virtual circuit. You can specify a number between 1 and 2,147,483,646 bits per second.
Be <number>
The number of bits per second contained in an excessive burst for a frame relay
virtual circuit. You can specify a number between 1 and 2,147,483,646 bits per second.
becn-adaptive-shaping <number>
The threshold (number of frames) at which adaptive shaping will activate when
receiving BECN frames. You can specify a number between 1 and 100,000 frames.
cir <number>
The committed information rate (in bits per second) for frame relay virtual circuits.
You can specify a number between 1 and 2,147,483,646 bits.
high-priority-queue-depth <number>
The number of high-priority frames allowed in the frame relay queue. You can specify
a number between 1 and 65,535. Cabletron recommends a value within the 5 - 100
item range. The default value is 20.
low-priority-queue-depth <number>
The number of low-priority frames allowed in the frame relay queue. You can specify
a number between 1 and 65,535. Cabletron recommends a value within the 5 - 100
item range. The default value is 20.
med-priority-queue-depth <number>
The number of medium-priority frames allowed in the frame relay queue. You can
specify a number between 1 and 65,535. Cabletron recommends a value within the 5 -
100 item range. The default value is 20.