Specifications

SSR Command Line Interface Reference Manual 221

frame-relay define service

Purpose

Configure service profiles for frame relay ports.

Format

frame-relay define service <service name> [bc <number>] [be <number>]

[becn-adaptive-shaping <number>] [cir <number>] [high-priority-queue-depth

<number>] [low-priority-queue-depth <number>] [med-priority-queue-depth <number>]

[red on|off] [red-maxTh-high-prio-traffic <number>] [red-maxTh-low-prio-traffic

<number>] [red-maxTh-med-prio-traffic <number>]

[red-minTh-high-prio-traffic <number>] [red-minTh-low-prio-traffic <number>]

[red-minTh-med-prio-traffic <number>] [rmon on|off]

Mode

Configure

Description

The frame-relay define service command allows you to specify the following attributes

for a newly created service profile:

• Number of bits per second contained in a committed burst for frame relay virtual

circuits.

• Number of bits per second contained in an excessive burst for frame relay virtual

circuits.

• Whether or not to simultaneously enable and specify the threshold at which adaptive

shaping will activate when receiving BECN frames

• The committed information rate (in bits per second) for frame relay virtual circuits.

• The allowable queue depth for high-, low-, and medium-priority frames on frame relay

VCs.

• Activation or deactivation of Random Early Discard (RED) for frame relay circuits.