Specifications

filters show address-filter
210 SSR Command Line Interface Reference Manual
filters show address-filter
Purpose
Displays the address filters.
Format
filters show address-filter
[all-source|all-destination|all-flow]
[source-mac <MACaddr> dest-mac <MACaddr>] [ports <port-list>]
[vlan <VLAN-num>]
Mode
Enable
Description
The filters show address-filter command displays the address filters currently configured
on the SSR.
Parameters
all-source|all-destination|all-flow
Specifies the types of filters you want to display.
source-mac <MACaddr>
Restricts the display to only those address filters that have been applied to this source
MAC address.
dest-mac <MACaddr>
Restricts the display to only those address filters that have been applied to this
destination MAC address.
ports <port-list>
Restricts the display to only those address filters that have been applied to the
specified ports.
vlan <VLAN-num>
Restricts the display to only those address filters that have been applied to the
specified VLANs.