Specifications

SSR Command Line Interface Reference Manual 207
filters add secure-port
filters add secure-port
Purpose
Applies a port security filter.
Format
filters add secure-port name <name> direction source|destination vlan <VLAN-num>
in-port-list <port-list>
Mode
Configure
Description
The filters add secure-port command shuts down Layer 2 access to the SSR from the ports
specified by in-port-list. The SSR drops all traffic received from these ports.
Note:
You can use port-to-address lock filters to force traffic to a port secured by the
filters add secure-port command.
Parameters
name <name>
Specifies the name of the filter.
direction source|destination
Specifies whether the filter is to secure a source port or a destination port.
vlan <VLAN-num>
Specifies the VLAN.
in-port-list <port-list>
Specifies the ports to which you want to apply the filter.
Restrictions
None.