Specifications

SSR Command Line Interface Reference Manual 205

filters add address-filter

Purpose

Applies an address filter.

Format

filters add address-filter name <name> source-mac <MACaddr>

dest-mac <MACaddr> vlan <VLAN-num> in-port-list <port-list>

Mode

Configure

Description

The filters add address-filter command blocks traffic based on a frame’s source MAC

address (source-mac), destination MAC address (dest-mac), or a flow (specified using

both a source MAC address and a destination MAC address).

Parameters

name <name> Specifies the name of the filter.

source-mac <MACaddr>Specifies the source MAC address. Use this option for source or

flow address filters.

dest-mac <MACaddr> Specifies the destination MAC address. Use this option for

destination or flow static entries.

vlan <VLAN-num> Specifies the VLAN.

in-port-list <port-list> Specifies the ports to which you want to apply the filter.

Restrictions

You should apply flow filters (specified using both a source MAC address and a

destination MAC address) only to ports that are using flow-based bridging.