Specifications

SSR Command Line Interface Reference Manual 195
Chapter 13
erase Command
The erase command erases the contents of the scratchpad or Startup configuration files.
Format
erase scratchpad|startup
Mode
Configure
Description
The erase scratchpad command erases the contents of the SSR’s command scratchpad.
The erase startup command erases the Startup configuration from the Control Module’s
NVRAM.
Parameters
scratchpad Erases the contents of the scratchpad. The scratchpad contains
configuration commands that you have issued but have not yet activated.
startup Erases the contents of the Startup configuration. The Startup configuration
is the configuration the SSR uses to configure itself when you reboot it.
When you erase the Startup configuration, then reboot immediately, the
SSR restarts without any configuration information.