Specifications

SSR Command Line Interface Reference Manual 193
Chapter 12
enable Command
The enable command switches the CLI session from User mode to Enable mode.
Format
enable
Mode
User
Description
The enable command switches your CLI session from User mode to Enable mode. After
you issue the command, the CLI will prompt you for a password if a password is
configured. If no password is configured, a warning message advising you to configure a
password is displayed.
If a password is configured and you do not know your password or pressing Return does
not work, see the administrator for the SSR.
To exit from the Enable mode and return to the User mode, use the exit command. To
proceed form the Enable mode into the Configure mode, use the configure command.
Parameters
None.