Specifications

dvmrp accept route
174 SSR Command Line Interface Reference Manual
dvmrp accept route
Purpose
Specifies routes to be accepted from DVMRP neighbor routers.
Format
dvmrp accept|noaccept route <IPaddr/mask> [exact] [interface <IPaddr> [router
<IPaddr>]]
Mode
Configure
Description
The dvmrp accept route command allows you to specify particular routes that can be
learned from DVMRP neighbors.
A route is always accepted from a DVMRP neighbor unless you use the dvmrp noaccept
route to prevent it from being accepted. You can use the dvmrp accept route command
along with the dvmrp noaccept route command to filter the routes accepted from DVMRP
neighbor routers.
Parameters
accept
Allows the specified route to be accepted from DVMRP neighbor routers.
noaccept
Prevents the specified route from being accepted from DVMRP neighbor routers.
route <IPaddr/mask>
Is the IP address and mask of the route prefix to be accepted.
exact
Causes only routes exactly matching the prefix to be accepted.
interface <ipAddr>
Is the IP address of the interface to which you are applying this filter.